Manual VIPA System SLIO Chapter 1 Basics and Assembly
HB300E - SM - Rev. 09/38 1-11
Wiring
DC24V
0V
DC24V
0V
1
2
DC24V max. 10A
SysDC5V max. 3A
[1] DC 24V Power section supply I/O area
[2] DC 24V Electronic power supply bus coupler and I/O area
Note!
Power section and electronic power section supply are internally protected
against higher voltage by fuses. The fuses are within the power module. If
one fuse released, its electronic module must be exchanged!
It is recommended to protect the power section supply with a fast 10A fuse
and the electronic power supply with a fast 4A fuse.
Standard wiring
To Next Page
Loading...
