About this manual Manual VIPA System SLIO
Subject to change to cater for technical progress.
About this manual
This manual describes the signal modules (SM) of the system SLIO from
VIPA. Here you may find besides of a product overview a detailed
description of the single modules. You’ll receive information about the
connection and the deployment of the System SLIO SM modules.
Chapter 1: Basics and Assembly
The focus of this chapter is on the introduction of the VIPA System SLIO.
Here you will find the information required to assemble and wire a
controller system consisting of System SLIO components.
Besides the dimensions the general technical data of System SLIO will be
found.
Chapter 2: Digital input
In this chapter you will find the description of the digital input modules of
the System SLIO from VIPA.
Chapter 3: Digital output
The digital output modules of the System SLIO will be found here.
Chapter 4: Analog input
After the introduction to the analog input modules and the list of the
measuring ranges the description of the analog input modules of the
System SLIO will be found here.
Chapter 5: Analog output
After the introduction to the analog output and the list of the output ranges
the description of the analog output modules of the System SLIO will be
found here.
Overview
To Next Page
Loading...
