Need help?Do you have a question about the Viper 106V and is the answer not in the manual?
General| Remote Start | No |
|---|---|
| Shock Sensor | Yes |
| Keyless Entry | Yes |
| Panic Mode | Yes |
| Number of Buttons on Remotes | 4 |
| Alarm Type | Siren |
| Starter Kill | Yes |
| LED Indicator | Yes |
| Type | Car Security System |
| Range | 1, 500 feet |
| Remote Control | Yes |
| Compatibility | Universal |
Lists all components included with the Viper 106V system, such as control module, touch-keys, decals, and hardware.
Explains how the Viper 106V system uses a control module and touch-keys to allow vehicle starting.
Diagram showing the 6-wire immobiliser harness connections for fuel pump, starter, and ignition circuits.
Diagram illustrating the connections for the power harness, including +12V and ground points.
Detailed guide for connecting each wire of the immobiliser harness to vehicle circuits.
Guide for connecting the power harness wires, including +12V and ground connections.
Instructions for mounting the touch-key receptacle for operator accessibility and LED visibility.
Guidance on selecting a secure location inside the vehicle for the control unit, avoiding moving parts.
Procedure for programming up to three touch-keys into the Viper 106V system.
Details on filling out and distributing the installation certificate to customer and other parties.
Common issues and solutions for Touch-Key not working or system not powering on.
To Next Page
