11
© 2013 Directed. All rights reserved.
System maintenance
This system needs no specific maintenance beyond remote control
battery replacement. The remote is powered by two 3V, CR2016
batteries.
1. Using a small flat-head screwdriver, insert into slot located on the
side of the remote control and carefully pry open the unit.
2. Turn unit over and carefully remove rear housing. Remove the
battery from holder and replace with a new one.
3. Reassemble all parts and snap together.
Note
Verify that the battery polarity is correct when replacing.
Patent Information
This product is covered by one or more of the following United States
patents:
Remote Start Patents:
5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936;
5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053;
7,483,783
Vehicle Security Patents:
5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591;
5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667;
5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484
Other patents pending.
To Next Page
Loading...
