EasyManua.ls Logo

Viper 3105V - Arming While Driving; Disarming

Viper 3105V
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
© 2012 Directed. All rights reserved.
Arming while driving
Your system can be armed while driving the vehicle.
Press
on your transmitter for two seconds while the vehicle is run-
ning or while the ignition is on. The siren chirps once, and then once
more indicating that the ignition is on. The security system does not
respond to any input except the door triggers and the Failsafe® Starter
Kill (if installed) will not activate. The security system disarms automati-
cally when the ignition is turned off. The siren chirps twice and the
LED stops flashing.
Note: If programmed for the optional Vehicle Recovery System (VRS)
feature, arming with the transmitter activates the VRS feature. (See VRS
section of this guide.)
Disarming
To disarm the system, press . You will hear two chirps, and the
parking lights will flash twice. If the power locks are connected to the
system, the doors will unlock. If the siren chirps either four or five times
when disarming, refer to the Diagnostics section of this guide. This is
called Tamper Alert.

Related product manuals