© 2008 Directed Electronics- All rights reserved.
33
4. Press and release the Valet/Program switch within 5 seconds.
The LED will flash in groups indicating the last two zones that
triggered the unit. The LED will flash for one minute or until
the ignition is turned off.
NOTE: The Warning Zone triggers are not stored to memory and will not be
reported.
Multi-Level Security Arming
Multi-Level Security arming allows the operator to select which inputs and
sensors are active during a particular arming cycle. For a full description of
Multi-Level Security Arming operation for testing purposes refer to the owner’s
manual.
To Next Page
Loading...
