Viper 3606V - Advanced Commands: Level 2; Sensor Bypass Operation; Valet Mode Activation; Activating AUX 2 Output

10
© 2013 Directed. All rights reserved.
Advanced Commands: (Level 2)
Press and release the button two times first, before pressing one of
the following command buttons. The transmit LED illuminates in sets of
double flashes to indicate Level 2.
Sensor Bypass
Press and release
Performing the Sensor Bypass command will incrementally bypass sen-
sor operations and be confirmed as follows:
• Warn-away bypass: The Parking lights flash two times. Sensors
will be activated for Full Trigger levels of impact only.
• Warn-away & Full trigger bypass: The Parking lights flash three
times. Sensors will not be activated for any level of impact.
• Sensor Bypass off: The Parking lights flash 1 time. Sensors are
fully operational.
Note
System needs to be armed to perform Sensor Bypass.
Perform arm command any time to turn Sensor Bypass Off.
Remote Valet
Press and release
Enters (or if On, exits) Valet Mode. The Control Center LED turns on
and off accordingly.
AUX 2
Press and release AUX
Activates (or if On, deactivates) the Aux 2 output.