15
© 2013 Directed. All rights reserved.
Emergency Override
The override feature allows you to select a specific number of presses
needed to disable the system.
If the override button has been programmed to a new number of
presses by your authorized dealer, that number should be indicated
as follows. Number of presses_______
1. Turn the ignition On.
2. Press the control button on the Control Center the correct number
of times (the default is 1 press).
3. After a few seconds the horn output ceases and the system is
disabled.
Note
As a precaution, if programmed for Passive Locking or Auto
re-locking the system should be placed into Valet Mode until
a remote is available.
To Next Page
Loading...
