15
© 2015 Directed. All rights reserved.
Once a feature is programmed:
1. Other features can be programmed within the same Menu.
2. Another Menu can be selected.
3. The Learn Routine can be exited if programming is complete.
To access another feature in the same Menu:
1. Press and release the Control Center button the number of times necessary to advance from the
feature just programmed to the next one desired to program.
2. Then press the Control Center button once more and hold it.
To select another Menu:
1. Press and hold the Control Center button.
2. After 3 seconds, the unit advances to the next Menu, the LED flashes and the horn honks, indicating
which Menu has been accessed.
The learn routine exits if any of the following occurs:
• The ignition is turned ON.
• There is no activity for 30 seconds.
• The Control Center button is pressed too many times.
Feature Menus
Default settings are Opt. 1 (in bold type).
Menu 1 - Vehicle Integration
Item Feature
Opt. 1
Opt. 2 Opt. 3 Opt.4 Opt. 5+
1
System Locking
Mode
Active Locking
Passive Locking Auto Re-locking
2
Panic Mode *
ON
Ign. OFF only OFF
3
Horn Function
(milliseconds)
Confirmation
Honk (20 ms)
& Panic
Confirmation
Honk (30 ms) &
Panic
Confirmation
Honk (40 ms) &
Panic
Confirmation
Honk (50 ms) &
Panic
Confirmation
Honk OFF - Panic
Only (Pulsed)
4
Ign-controlled Locks
No Ign-locking
Lock & Unlock Lock Only Unlock Only
5
Door Lock Pulses
Single
Double Unlock
Only
Double Lock Only Double Lock &
Unlock
6
Door Lock output
duration (seconds)
0.8 sec.
3.5 sec. 0.4 sec.
7
Ignition Controlled
2nd Unlock
Delayed 2nd
Unlock ON/
Ign-control
after first
Unlock
Immediate 2nd
Unlock ON/
Ign-control with
first Unlock
8
Comfort Closure *
No Comfort
Closure
Comfort Closure 1 Comfort Closure 2
9 Hood Switch Type
Normally Open
Normally
Closed
10
Door Switch Type
Normally Open
Normally
Closed
11 Remote Button
unlock (Ign OFF)**
ON
OFF
* Not available with the 1-button remote control.
** Not available with the 1-way remote control.
To Next Page
Loading...
