Viper 4811V - Page 42

17
© 2015 Directed. All rights reserved.
10. Door Switch Type
1. Normally Open: for vehicles with door switches that rest at power or ground when the door is
OPEN.
2. Normally Closed: for vehicles with door switches that rest at power or ground when the door is
CLOSED.
11. Remote Button Unlock (Ign. OFF)
1. On: a message telling the 2-way remote control to unlock the keypad is sent each time the vehicle
ignition is turned OFF.
2. OFF: no message is sent.
Note: This feature works in conjunction with the keypad lock feature of the remote control.
Menu 2 - Convenience
Item Feature
Opt. 1
Opt. 2 Opt. 3 Opt.4 Opt. 5+
1 One-time Bypass
One-time
bypass OFF
One-time
bypass ON
2 Override Pulse Count
1
2345
3 Door Open Error Chirp*
ON
OFF
4 OEM Alarm Disarm
with AUX/trunk
ON
OFF
5 OEM Alarm Disarm Output
With Unlock
Before Unlock Remote Start
Only
6 OEM Alarm Disarm Pulses
1
2
7 AUX 1 Output Type**
Validity
Latch Latch/reset/ign. Timed OFF (5)/2nd
Unlock (6)
8 AUX 1 Linking
No Linking
Link to Lock Link to Unlock Link to Lock/
Unlock
Link to Remote
Start only
9 AUX 2 Output Type**
Validity
Latch Latch reset/ign Timed OFF (5)/2nd
Unlock (6)
10 AUX 2 Linking
No Linking
Link to Lock Link to Unlock Link to Lock/
Unlock
Link to Remote
Start only
11 AUX 3 Output Type**
Validity
Latch Latch reset/Ign Timed OFF (5)/2nd
Unlock (6)
12 AUX 3 Linking
No Linking
Link to Lock Link to Unlock Link to Lock/
Unlock
Smart Key
Control (Link to
Remote Start
OFF)*
13
AUX 4 Output Type**
Validity
Latch Latch reset/Ign. Timed OFF (5)/2nd
Unlock (6)
14
AUX 4 Linking
No linking
Link to Lock Link to Unlock Link to Lock/
Unlock
Link to Remote
Start Only
15
Aux/Trunk Output Type
Validity
OFF 2nd Unlock
* Only applicable if the door triggers are connected as well as the horn honk output.
** AUX channels with the 1-button remote can only be accessed with channel linking to unlock or remote
start.