20
© 2013 Directed. All rights reserved.
Advanced commands: Function Level 5
From blank screen, toggle menu wheel down 5 times
Car Select
Press and release
Sends a request message to the selected car which, if within range,
responds with its status information. The
CAR 1
or
CAR 2
screen and
beeps play to confirm the change followed by the updated Status
screen.
Car 2 must have a Name Tag set in the Options menu before it can
be selected. If the selected car does not respond the remote displays
the
CAR 1 NOT AVAILABLE
screen (or car 2 if applicable) and remains
in the newly selected car mode.
AUX 4
Press and release
AUX
Activates (or if On, deactivates) the Aux 4 output. The
AUX CHANNEL
screen and On tones or Off tones play to confirm.
To Next Page
Loading...
