Virax VISIOVAL VX - 14 Fault

70
14. Fault
Fault type
Possible cause
Solution
When pressing the On/Off
button, the button outline
flashes briefly in red and
the screen is not lit.
Battery discharged.
Recharge the battery or connect the camera
to mains.
The battery level display
on screen indicates a low
level.
Battery discharged.
Recharge the battery or connect the camera
to mains.
The screen is off but the
camera head is on.
The screen plug is not
inserted properly in
the outlet.
Push the screen plug.
Image in black and white
The colour intensity
setting is on
minimum.
Move key 4 up to adjust colour intensity
▲.
Bad visibility
The plastic dome is
scratched.
Replace the plastic dome.
The camera and/or screen
do not respond.
Battery discharged.
Recharge the battery or connect the camera
to mains.
The device is faulty.
Ship the device to the repair workshops.
Blue screen indicating NO
SIGNAL on screen
The flexible rod is
broken.
Ship the device to the repair workshops.
The screen's plug-in
connector is not
connected properly
Connect the plug-in connectors properly.
The cables located in
the connector are
faulty.
Ship the device to the repair workshops.