Operator’s Manual
Operating Procedure
39/50
3.3.12.
R
ESULTS
Once each strip has completed its analysis process the result is calculated and stored into a file located in the program
folder. Moreover, if the LIS connection is active the results are transferred to the host computer of the laboratory.
Finally, if a printer has been connected to the PC and configured in the service menu, the results will also be printed out.
3.3.13.
E
ND OF
W
ORK
At the end of the day, when all the analysis sessions have been completed, the user must put 0.25L of distilled water in
the proper tank (see Fig.1.4-02) and perform Maintenance, by clicking on the button in the running screen bottom.
To Next Page
Loading...
Need help?
General