Operator’s Manual
Errors & Warning Messages
44/50
The user is requested to perform the following actions:
Empty: Press empty to empty the waste tank.
Attention: in case of the waste tank being full, some of the tests could be aborted!
4.4 S
TRIP
W
ASTE
C
ONTAINER
F
ULL
The strip waste container residual capacity is calculated after each strip disposal, when the number of discarded strips
exceed the maximum, the system stops discarding the other Strips that will remain on the reaction rotor until the
container is emptied and a warning message is displayed:
The user is requested to perform the following actions:
Empty: Press empty to issue a request to the system to empty the strip waste container
Attention: if the strip waste container reaches the maximum capacity the yield of the
instrument will be reduced.
To Next Page
Loading...
Need help?
General