Vircell VirClia Lotus User Manual

Operator’s Manual
Operating Procedure
25/50
3.2. B EFORE P ROGRAMMING AN A NALYSIS S ESSION
Before running each session, the following operations must be carried out:
o Turn on the switch on the right side of the instrument;
o Turn on the Computer and make sure all the connections on the workstation are done (printer, mouse,
keyboard and video);
o Make sure the used strips case is empty;
o Make sure the waste tank is empty;
o Make sure the drainpipe is placed into the specific tank or into the centralized drain if available.
3.3. S ESSION P ROGRAMMING , R UNNING AND R ESULTS
3.3.1 W ASH B UFFER , C LEANING S OLUTION , AND W ASTE T ANK
Before to start the PC program make sure that the Wash Buffer Solution has been prepared following the dilution ratio
specified in the IFU.
3.3.1.1 F ILL THE W ASH B UFFET T ANK (5L CAPACITY )
With the prepared solution and connect the tubing:

Vircell VirClia Lotus Specifications

General

Brand	Vircell
Model	VirClia Lotus
Category	Laboratory Equipment
Language	English