10
6. Installing the Chain Guard
1. Remove the 3 Phillips bolts from the guard supports near the front and rear sprockets. Place
them nearby.
2. Place the chain guard (20) onto its supports and over the chain as shown.
3. Replace the bolts, tightening them with your Phillips screwdriver.
4. Rotate the chain to see if it rubs against the guard. If it does, readjust the guard so that the
chain moves freely.
7. Installing the Seat
1. Loosen the locking bolt on the seat tube of the main frame by turning its handle
counterclockwise.
2. Insert the seat post into the tube until your preferred height is reached.
3. Retighten the locking bolt by turning its handle clockwise.
To Next Page
Loading...