4
*
Do not connect the instrument to the socket by multiple connector, or it will
lower the sound quality, or it will make socket overheat.
Assemble Use
*
Please carefully read the attachment that explains the assemble process.
If assembling the instrument in a wrong order, it will damage the instrument
and hurt the user.
*
Please connect the external equipment while the digital piano is off.
*
Before using, please install the supporting screw and adjust it close to the
ground, in case of trampling pedal.
Installation place
*
In case of deformation of control panel and damage to inner components,
please do not place this device in an environment with a lot of dirt, vibration,
extreme cold and hot (such as, direct sunshine, closing to heater and inside
a car under the burning sun)
*
Please do not use this device near the television, radio, stereo, cell phone
or other electronic devices. This may make noise on the device itself and
To Next Page
Loading...
