121
Advanced Manual - Viscount
Prestige
7.8 RENAMING FILES
The FILE RENAME function allows you to rename the files saved on floppy disks. To recall this
function, select the REN field and press the [ENTER] button; the display will show the contents of
the floppy disk:
CUSTOM__.ALL CUSTOM_1.ALL BANK1___.MEM
PRESETS1.MEM DEFAULT_.ALL ERIC____.SET
now use the [CURSOR] buttons to select the file you wish to rename and press [ENTER].
The display now shows a video page consisting of two fields: ACTUAL NAME contains the
current name of the selected file. NEW NAME allows you to type the new name.
As usual, use the [CURSOR] buttons to move the cursor and the [VALUE] encoder to enter the
letter you require.
Once you have created the new name, press [ENTER] to complete the operation.
Press [EXIT] to abort the function and leave the name of the file unchanged.
If you confirm the rename, the following video page will appear for a few moments:
RENAME FILE ACTUAL NAME:PRESETS1.MEM
NEW NAME:PRESETS1.MEM
******** RENAMING *******
FILE: PRESETS1.MEM
which also informs you about the file you have just renamed.
If you rename a file with a name already present on the floppy disk, the display will show the
message:
indicating that the operation cannot be completed. Rename the file with a different name.
Error:
File already exists
To Next Page
Loading...
Need help?
General
