Quick Start Guide
VT300 User’s Guide, Rev. A4 xiii Doc # UM-VT300-EN
Quick Start Guide
Front Panel
Keys
Press to zero the scale*. Only works within the zero range.
Press once to tare the scale*. Press again to view gross weight.
Press to enter a preset tare. Enter the tare value using the alphanumeric keypad and press
ENTER. The display shows net weight. To cancel and view gross weight, press ESC.
When you press this key, the current weight* is printed to the printer, output to an attached
computer, and added to the accumulated total.
Press to switch between Weighing Mode and Counting Mode.
Press to turn the indicator on, or to switch it off when it is running.
Press to perform a first weighing of a vehicle with unknown tare.
Press to weigh a vehicle with known tare, or to perform a second weighing of a vehicle with
unknown tare.
Toggles between scale 1, scale 2 and the sum of both scales (if two scales are connected to the
indicator).
Enters the menu. The arrows around this button allow you to navigate the menu
Keys (cont.)
To Next Page
Loading...
