Need help?Do you have a question about the Vishay G4 and is the answer not in the manual?
Critical safety information regarding qualified personnel and potential hazards.
Describes the G4's role in converting strain gauge signals to weight information.
Advises continuous power supply to prevent moisture condensation.
Details displays and operations during instrument power-up.
States only qualified personnel should perform service and outlines basic cleaning.
Outlines utilization, grounding, and interprets safety symbols.
Describes the two-line LCD and four function keys for viewing/editing parameters.
Explains how display shows weight/flow and scale info (G, N, M, Z).
Provides descriptions for Tare, B/N, Print, Zero, Levels, Pre. Tare, and W/F.
Explains basic zero setting during calibration and rapid adjustment.
Defines gross/net weight and how to toggle between displays.
Explains storing current gross weight as an auto tare value.
Describes instrument's capability to supervise signals at 32 defined levels.
Details how to view and edit switch-over values for scale levels.
Guides on setting accumulated weights for all scales to zero.
Explains finding and modifying accumulated batch weights.
Details mounting instrument on DIN rail and removal.
Outlines field wiring compliance, circuit breakers, and power supply connections.
Describes RS-232 serial communication for connecting to computers/PLCs.
Describes RS-485 serial communication for connecting to computers/PLCs.
Provides critical notes on routing cables and connecting shields for accuracy.
Explains parameter control and recommends activating set-up lock for security.
Details configuring installed modules and used measuring channels.
Describes two-level security locks and default access codes.
Details process of selecting display language for the instrument.
Explains choosing desired format for displaying dates.
Explains choosing desired format for displaying time.
Recommends enabling set-up lock and setting security code.
Explains setting unit of measurement for the scale.
Explains defining scale's display resolution and decimal point.
Explains setting nominal range (capacity) for the scale.
Explains setting conversion factor from transducer to measurement units.
Explains setting number of support points for load.
Explains entering transducer's rated load from data sheet.
Details setting transducer output signal values for calibration.
Explains how to set scale to display zero when unloaded.
Describes zero offset value and its non-editable nature.
Details process for exiting calibration, with options to save/reject changes.
Introduces deadweight calibration as the most accurate method.
Explains setting number of calibration points for deadweight calibration.
Details setting load for lowest calibration point (usually zero).
Details setting load for highest calibration point.
Shows automatically stored transducer signals for calibration points.
General| Brand | Vishay |
|---|---|
| Model | G4 |
| Category | Accessories |
| Language | English |
To Next Page
