G4 Multi Channel Weighing Instrument
Introduction
General
G4 is a high performance multi channel weighing instrument intended for industrial
systems. Its basic function is to convert the signals from strain gauge transducers
to useful weight information. Several types of communication interfaces are
supported by G4, which makes it easy to integrate the instrument into industrial
processes.
G4, type RM, is easily mounted on a DIN rail. All connections and the service
panel are accessible from the front end. By a LCD-display and four function keys
at the service panel, weight values are presented and parameter values can be
viewed and edited.
The basic configuration of the instrument performs weighing and flow rate
measurement. All functions are controlled by set-up parameters.
‘Operating instructions, Quick installation’ for G4 type RM includes basic installation
and set-up information, required for correct measuring with the instrument.
This description deals with the following points:
• Weighing with G4 type RM.
• Flow rate measurement (program option).
• Scale Batching (program option)
• Quick installation.
• Data sheet calibration.
• Deadweight calibration in two points.
Additional installation and set-up of more instrument functions, not covered by this
description, can also be performed, for example:
• Complete installation.
• Complete set-up.
• Setting of communication parameters.
• Table calibration.
• Level supervision.
• Program option activation.
For a complete instrument description, refer to:
G4 Multi Channel Weighing Instrument
Technical Manual
RM type
Power supply
Power supply to the weight indicator should not be turned off during weekends and
over-night. Continuous power supply to electronics and transducers prevents moisture
condensation in the units.
1
To Next Page
Loading...
