Need help?Do you have a question about the Vishay VT 200 and is the answer not in the manual?
General| Brand | Vishay |
|---|---|
| Model | VT 200 |
| Category | Accessories |
| Language | English |
Basic technical characteristics of the VT200/220 indicator.
Specifications for the analog input, including load cell excitation and signal ranges.
Specifications for digital outputs, including voltage, current, and delays.
Guidelines for selecting a suitable mounting location, considering environmental factors.
Diagrams and instructions for connecting load cells to both desktop and wall-mount models.
Configuration for RS232 and RS485 serial ports, including cable specifications.
Description of the LED/LCD display and status annunciators on the indicator.
Overview of the front panel keys and their dual functions for operations and navigation.
How to access and use the function menu for advanced operations.
Procedure for calibrating the scale using physical weights (zero and span).
Procedure for calibrating the scale using mV values entered via the keypad.
Methods for securing the calibration settings using jumpers and seals.
Accessing and editing general parameters via the PAR menu.
Accessing and editing parameters within the SETUP 1 submenu.
Configuration details for RS232 and RS485 serial ports.
Description of various output data formats like Continuous Weight, EDP, and Alibi.
How to configure upper and lower weight thresholds for digital setpoints.
Steps to configure the analog output for current or voltage, including calibration.
Procedures for performing various service operations, like setting PIN and date.
Procedures for testing various components like ROM/RAM, keypad, display, and ports.
A table listing common error codes, their possible causes, and recommended actions.
To Next Page
