G4 Multi Channel Weighing Instrument
Level supervision
With G4 it is possible to supervise different weighing signals at defined levels.
The instrument contains 32 supervising units, Level 1 to Level 32, which can be
connected to the scales by the parameter set-up.
All Levels, connected to a scale, can easily be shown by scrolling at the display.
Edit levels
The defined supervising levels for a scale are easily viewed and edited
from VIEWPAN at G4 RM.
Editing of levels is performed without interrupting the normal weighing operation.
Example: Scale 1, with some connected Levels,
is in normal weighing operation.
Press key ↑ to see Additional functions.
Use key + or – to find the additional
function 'Levels'.
Press key ↵ .
The value of the first Level for Scale 1 is shown.
Use key + or – to scroll all Levels for the scale.
Press key ↵ to edit a displayed value.
If the Operator Lock is active, the Operator Code
will be needed.
123.4 kg
S1:G
123.4 kg
S1:G Levels
Level 2
50.0 kg
A cursor appears, meaning the value is
ready for editing.
Level 2
Use key + or – to edit one cursor position at a time.
+000055.0
Accept the value of each position by pressing key ↵ .
Finish by pressing key ↵ for 1 second.
The new value for the edited Level is displayed.
Level 2
Press key ↑ to return to normal weight operation.
55.0 kg
9
To Next Page
Loading...
