G4 Multi Channel Weighing Instrument
Editing Preset tare
In this example Scale 1 is set for taring with ‘Preset tare’. The example shows editing
the value of ‘Preset tare’ from VIEWPAN.
Scale 1, set for preset taring,
is in normal weighing operation.
Press key ↑ to see Additional functions.
Use key + or – to find the additional
function 'Pre.Tare'.
Press key ↵ .
The value of Preset tare for the scale is shown.
Press key ↵ to edit the value.
033.2 kg
S1:N
033.2 kg
S1:N Pre.Tare
Preset Tare 1
12.0 kg
If the Operator Lock is active, the Operator Code will be needed.
A cursor appears, meaning the value is ready
for editing. Use key + or – to edit one digit
at a time. Accept each digit by pressing key ↵ .
Finish by pressing key ↵ for 1 second.
The edited value of preset tare
for Scale 1 is displayed.
Press key ↑ to return to normal weight operation.
Scale 1 displays the weight value.
035.2 kg
S1:N
Preset Tare 1
000010.0 kg
Preset Tare 1
10.0
7
To Next Page
Loading...
