Operating instructions, Quick installation
Accumulated Weights
Every time a weight is printed the weight value is added to an accumulated value for
each scale. Accumulation is done even if no printer is set-up or connected.
Accumulated weights can be changed and set to zero from menu 'Accum. Weights'.
This menu is reached from the 'Main Menu'.
Zero setting of accumulated weights for all scales
The example below shows how to set the accumulated weights for all scales in the
instrument to zero.
Press the keys + and ↑ simultaneously
for 1 second to open 'Main Menu'.
The 'Main Menu' is displayed.
Use key + or – to find sub menu 'Accum. Weights'.
Press key ↵ .
Menu 'Accum. Weights' is displayed with the
accumulated weight for the first scale on the lower
row.
Press the key + a number of times until
'Zero ALL values?' is shown.
Press key ↵ (Yes) to set the accumulated weights
for all scales to zero.
123.4 kg
S1:G
Main Menu
Accum. Weights
ccum.Weight,S1
3798.100 kg
Zero ALL values?
No Yes
If the Operator Lock is active, the Operator Code
will be needed.
A confirm question will be shown.
Press key ↵ (Yes) again to perform the zero setting.
The instrument returns to accumulated weights display.
Press key ↑ several times to return to
weight display.
Continue?
No Yes
To Next Page
Loading...
