Vishay G4 - Flow Display Option

Operating instructions, Quick installation
Flow display (program option)
When option Flow display is activated for a scale, the additional function 'W/F' can be
shown in the scale display.
When 'W/F' is made visible during weight display, and key ↵ is pressed,
this will switch the scale over to display of flow value.
When 'W/F' is made visible during flow display, and key ↵ is pressed,
this will switch the scale over to weight display.
Example: Scale 1, with the Flow display activated,
is in normal operation, displaying
an increasing gross weight.
Press key ↑ to see Additional functions.
Use key + or – to find the additional
function 'W/F'.
Press key ↵ .
The measurement value for Scale 1
changes from weight to flow.
As the scale is displaying the flow value,
press key ↑ to see Additional functions.
Use key + or – to find the additional
function 'W/F' .
Press key ↵ .
The measurement value for Scale 1
changes from flow to weight.
064.4 kg
S1:G M
096.8 kg
S1:G M W/F
2.15 kg/s
S1:Flow
2.15 kg/s
S1:Flow
131.1 kg
S1:G M
2.15 kg/s
S1:Flow W/F
12