u Remove lower head.
u Remove the 3 screws that secure the mirror assembly.
u Remove/replace the mirror assembly.
u Reverse the procedure to re-assemble.
Surface Cleaning and Preparation
When cleaning Mantis parts/accessories, or surfaces to re-apply adhesives for remounting mirrors, only use the
following products:
• 'Hos pi tal Qual ity' cot ton wool
• Industrial Methylated Spirit
• Johnson Cotton Buds
• Fabric Swabs
• Anti-Static optical lens cleaning spray
• Microfibre lens cleaning cloth
• Tissues
If grease or dirt has contaminated a mirror or field lens, it should be cleaned first with cotton wool and methylated
spirit and then a clean tissue.
Be sure to clean the whole mirror/lens to avoid smearing/streaking.
www.visioneng.com/support Mantis Service Manual
MAINTENANCE & SPARE PARTS
19
To Next Page
