24
If, during the warranty period the product is found to be defective, it will be repaired or replaced at
facilities of Vision Engineering Inc. or elsewhere, all at the option of Vision Engineering Inc.
However, Vision Engineering Inc. reserves the right to refund the purchase price if it is unable to
provide replacement, and repair is not commercially practicable or cannot be timely made.
Parts not of Vision Engineering Inc. manufacture carry only the warranty of their manufacturer.
Expendable components such as lamps and fuses carry no warranty.
This warranty does not cover damage caused in transit, damage caused by misuse, neglect, or
carelessness, or damage resulting from either improper servicing or modification by other than
Vision Engineering Inc. approved service personnel. Further this warranty does not cover any
routine maintenance work which is reasonably expected to be performed by the purchaser.
No responsibility is assumed for unsatisfactory operating performance due to environmental
conditions such as humidity, dust, corrosive chemicals, deposition of oil or other foreign matter,
spillage, or other conditions beyond the control of Vision Engineering Inc..
Except as stated herein, Vision Engineering Inc. MAKES NO OTHER WARRANTIES, EXPRESS
OR IMPLIED BY LAW, WHETHER OR MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OR OTHERWISE. Further, Vision Engineering Inc. shall not under any
circumstances be liable for incidental, consequential or other damages.
To Next Page
Loading...
Need help?
General
