What to do if Vision Fitness Equipment shows battery disconnection or fail?
If the Vision Fitness Equipment displays a 'Battery disconnection or fail' error, inspect the battery connection. If the connection is secure, replace the battery.
What to do if Vision Fitness Equipment shows LCB battery low voltage?
If your Vision Fitness Equipment indicates 'LCB Battery Low Voltage', examine the battery recharge function. If the issue persists, replace the battery.
What to do if Vision Fitness Fitness Equipment LCB has no message returned to the UCB for over 3 seconds?
If the Vision Fitness Equipment's LCB doesn't send a message back to the UCB for more than 3 seconds, check the console cable connections. If the problem continues, replace the LCB or UCB as needed.
What to do if Vision Fitness Fitness Equipment displays machine type error?
If the Vision Fitness Equipment displays a Machine Type Error, set the Machine Type to the correct type of LCB.
What to do if Vision Fitness Fitness Equipment displays resistance type error?
If the Vision Fitness Equipment displays a Resistance Type Error, set the Machine Type to the correct type of LCB.
What to do if Vision Fitness Fitness Equipment power resistor is short circuited?
If the power resistor in your Vision Fitness Equipment is short-circuited (over 4A) or the current exceeds 3.7A for 1 second, check the power resistor's connection. If the issue continues, replace the power resistor.
What to do if Vision Fitness Fitness Equipment LCB has not received a command?
If the LCB hasn't received a command when the UCB implements one on your Vision Fitness Equipment, check the console cable connection. If necessary, replace the LCB.
General| Weight Capacity | 300 lbs |
|---|---|
| Display Type | LCD |
| Max User Weight | 300 lbs |
| Type | Elliptical |
| Dimensions | 70" L x 24" W x 68" H |
Schedule for routine checks and maintenance tasks for the elliptical machine.
Instructions on how to enter and navigate the engineering mode for settings.
Lists console error codes, their descriptions, and recommended solutions.
Diagnoses and solutions for issues with the console display not working or being dim.
Diagnoses and solutions for when the RPM reading is not displayed during exercise.
Troubleshoots unresponsive function keys on the console.
Diagnoses and solutions for problems with high or no resistance during exercise.
Troubleshoots heart rate function not working or providing incorrect readings.
Procedure for replacing the lower control board (LCB).
Instructions for removing and replacing the generator.
Procedure for replacing the generator belt.
To Next Page