ORANGE BAG
LIGHT BLUE BAG
GREEN BAG
HARDWARE INCLUDED
PINK BAG
M8x70L Socket Head Bolt
Quantity: 4
HARDWARE INCLUDED
8.2x25x1.5T Washer
Quantity: 4
S7100 – SUSPENSION ELLIPTICAL TRAINER
6mm L-Shaped Wrench
Screwdriver
5mm L-Shaped Wrench
TOOLS & PARTS INCLUDED
PARTS BOX
Assembly Guide
Power Cord
Incline Arm Covers, Qty. 2
Crank Arm Bearing End Caps, Qty. 2
Elevation Bracket Cover
Color-coded Hardware Bags
PURPLE BAG
M8 Nut
Quantity: 4
M8x90L Bolt
Quantity: 2
ASSEMBLY
GUIDE
S7100
SUSPENSION ELLIPTICAL
™
TRAINER
toll free 800.335.4348
www.visionfitness.com
©2009 Vision Fitness. All Rights Reserved. May be covered by one or more patents or patents pending: US 5540637, US 5573480,
US 5813949, US 5813949, US 5924962, US 5938567, US 6135927, US 6149551, US 7316633, TW 364373, TW 371899, CN 99808486.7
10.09
AG18.69PRD
REV4
BLUE BAG
3/8x56L Socket Head Bolt
Quantity: 1
M8x25L Socket Head Bolt
Quantity: 4
M8 Flat Washer
Quantity: 4
M8 Nut
Quantity: 2
8.2x25x2.5T Washer
Quantity: 2
M8x15L Button Head Bolt
Quantity: 2
8.2x16x2T Washer
Quantity: 4
M8 Nut
Quantity: 2
M8x50L Bolt
Quantity: 2
M5x15L Silver Bolt
Quantity: 2
To avoid possible damage to this Suspension Elliptical™ Trainer, please follow assembly steps in the correct order. Before proceeding
though, find your new Suspension Elliptical™ Trainer’s two serial numbers located on the console mast frame bracket, and on the back
side of the console, and enter here:
Console Mast Frame Bracket Serial Number: ____________________________________
Console Serial Number: ________________________________________
Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records.
Be sure to read your Owner’s Guide before using your new Suspension Elliptical™ Trainer.
If any parts, hardware or tools are missing, please call 1.800.335.4348
NOTE: It is recommended that you apply grease to the threads of each bolt and screw as you assemble your Suspension Elliptical™
Trainer to prevent loosening and noise. Also, during each assembly step, ensure that ALL bolts and screws are in place and partially
threaded in before completely tightening any ONE bolt or screw.
M8x20L Socket Head Bolt
Quantity: 4
15mm Wrench
Qty: 2
13mm Wrench
10.2x15x1.5T Washer
Quantity: 1
Spacer Bushings
Quantity: 4
M5x15L Bolt
Quantity: 8
BLACK BAG
8.5x48x5T Washer
Quantity: 2
M10x25L Button Head Bolt
Quantity: 2