Vision 1624 User Manual

Vision Series 5 Controller User Manual52
© 2019 Vision Engraving Systems
6 Operation
6.1 Starting the Vision Mov UI spooler
The Vision Mov UI spooler program must be running and connected before proceeding.
The Vision Mov UI program should start automatically after the program is installed and when the
computer is restarted. The screen below will appear when it is running.
If it is not running, select the Vision Mov UI icon from the Windows desktop.
Select the Machine in the "Machines Discovered on Network" screen by clicking on it and then click
Select.

Vision 1624 Specifications

General

Brand	Vision
Model	1624
Category	Engraver
Language	English