User’s Manual
11
2.3 Connect other Device
For connection of other devices, please refer to following figure:
Connect LOOP OUT port on the receiver to LNB IN port on another receiver.
Connect S/P DIF port on the receiver to corresponding port on amplifier with an S/P DIF
cable, or connect R-AUDIO (red)/L-AUDIO (white) ports on the receiver to corresponding
ports on amplifier.
Note: If you encounter any problem during the connections, please contact your local
operator.
2.4 Power on
1. Connect power cord of the receiver to power socket.
2. Turn on the receiver, system initializes and start-up OSD is shown on TV screen.
Note: Please turn on your TV and switch it to AV mode.
2.5 Search Channel
If there is no channel stored in the receiver, after initialization, system will search channels
automatically.
If there are some channels stored in the receiver, after initialization, program will be played
automatically, and the channel number is shown on front panel DISPLAY.
Note: For more search details, please refer to 8. Channel Search.
To Next Page
Loading...
Need help?
General