VisionTrack VT2000 - Page 13

13
SOFTWAREINSTALLATION
1.ConnecttheSDcardintoyourPC(ifyourcomputerdoesnothaveand
SDcardslotusetheUSBSDcardreader)andopenthe“MyComputer”
2.Right‐clickthe“FHDRM”driveandselect[Open]
3.Doubleclick[configtool(FW1.0.0_PC1.0.0.0_V1).EXE]inthe[pcsw]folder.
4.Selectthelanguageandthenfollowthedialogboxprompts.
5.The“ConfigurationToolVT2000”iconwillbedisplayedonyourdesktop.
NOTE:ToUn‐installtheConfigurationToolVT2000Software
Makesuretheprogramisnotrunningandopenthe‘ControlPanel’
Select‘RemoveProgram’andremovetheConfigurationToolVT2000Software.
TheConfigurationToolVT2000 SoftwareisontheprovidedSDcard.(Also
availableonourwebsite.)