Visonic PowerMaster-33 G2 User Manual

PowerMaster-33 G2
Version 19.3
Installer’s Guide
Table of Contents
1. INTRODUCTION ................................................. 2
1.1 System Features .......................................... 3
2. CHOOSING THE INSTALLATION LOCATION .. 7
3. POWERMASTER-33 G2 INSTALLATION .......... 8
3.1.1 PowerMaster-33 G2 Wiring Diagram with
EXP-33 Expander Module .................................. 8
3.1.2 PowerMaster-33 G2 Wiring Diagram with
LE Expander Module .......................................... 9
3.2 Opening the PowerMaster-33 G2 Control
Panel and Bracket Mounting ........................... 10
3.3 Connecting to the Telephone Line ............ 10
3.4 Connecting Wired Zone and Siren ............ 11
3.5 Cellular Module and SIM Installation ........ 12
3.6 PGM-5 Installation ...................................... 13
3.7 PowerLink3 Installation ............................. 14
3.8.1 EXP-33 Expander Module Installation ... 15
3.8.2 LE Expander Module Installation ........... 17
3.9 Connecting Power to the Control Panel ... 18
3.9.1 Battery Insertion ................................. 19
3.9.2 Connect AC Power to the Unit ........... 19
3.10 Closing the PowerMaster-33 G2 Control
Panel ................................................................. 20
4. VISUAL INDICATIONS, FIRST KEYPAD
ENROLLMENT AND USING PROX TAG ............. 21
4.1 PowerMaster-33 LED Indications .............. 21
4.2 Enrollment of the First KP-250 PG2 Keypad
........................................................................... 21
4.3 Using Proximity Tags................................. 22
5. MAINTENANCE ................................................ 22
5.1 Dismounting the Control Panel ................. 22
5.2 Replacing the Backup Battery................... 22
5.3 Fuse Replacement ..................................... 22
5.4 Replacing/Relocating Detectors ............... 22
5.5 Annual System Check................................ 22
APPENDIX A. Specifications............................... 23
A1. Functional .................................................. 23
A2. Wireless ...................................................... 23
A3. Electrical .................................................... 24
A4. Communication ......................................... 25
A5. Physical Properties ................................... 25
A6. Peripherals and Accessory Devices ............ 27
APPENDIX B. Compliance with Standards ......... 28
Quick User Guide to Main Alarm Control
Operations by KP-250 PG2 Keypad .................... 31
D-306917 PowerMaster-33 G2 Installer's Guide 1

Visonic PowerMaster-33 G2 Specifications

General

Brand	Visonic
Model	PowerMaster-33 G2
Category	Control Panel
Language	English

Summary

1. INTRODUCTION

Expander Module Comparison

Compares characteristics of LE and EXP-33 expander modules, detailing external connections and features.

1.1 System Features

Details the system's capabilities and their configuration and usage.

2. CHOOSING THE INSTALLATION LOCATION

3. POWERMASTER-33 G2 INSTALLATION

3.1.1 PowerMaster-33 G2 Wiring Diagram with EXP-33 Expander Module

Illustrates wiring for the control panel with the EXP-33 expander module.

3.1.2 PowerMaster-33 G2 Wiring Diagram with LE Expander Module

Shows wiring for the control panel with the LE expander module.

3.2 Opening the PowerMaster-33 G2 Control Panel and Bracket Mounting

Steps for opening the control panel and mounting the bracket.

3.3 Connecting to the Telephone Line

Instructions for connecting the system to a telephone line.

3.4 Connecting Wired Zone and Siren

Details on connecting wired zones and a siren to the control panel.

3.5 Cellular Module and SIM Installation

Guide for installing the cellular module and SIM card.

3.6 PGM-5 Installation

Information on installing the PGM-5 output module.

3.7 PowerLink3 Installation

Steps for installing the PowerLink3 module for internet connectivity.

3.8.1 EXP-33 Expander Module Installation

Instructions for installing the EXP-33 expander module.

3.8.2 LE Expander Module Installation

Guide for installing the LE expander module.

3.9 Connecting Power to the Control Panel

Procedures for connecting power to the control panel.

3.9.1 Battery Insertion

How to insert the backup battery pack.

3.9.2 Connect AC Power to the Unit

Steps to connect the unit to AC power.

3.10 Closing the PowerMaster-33 G2 Control Panel

Final steps for closing and securing the control panel.

4. VISUAL INDICATIONS, FIRST KEYPAD ENROLLMENT AND USING PROX TAG

4.1 PowerMaster-33 LED Indications

Details the meaning of LED indicators on the PowerMaster-33 panel.

4.2 Enrollment of the First KP-250 PG2 Keypad

Procedures for enrolling the first KP-250 PG2 keypad.

4.3 Using Proximity Tags

How to use proximity tags for system access.

5. MAINTENANCE

5.1 Dismounting the Control Panel

Instructions for removing the control panel from its mounting.

5.2 Replacing the Backup Battery

Steps for replacing the backup battery.

5.3 Fuse Replacement

Information on fuse replacement.

5.4 Replacing/Relocating Detectors

Guidance on replacing or relocating detectors.

5.5 Annual System Check

Requirements for annual system maintenance and checks.

APPENDIX A. Specifications

A1. Functional

Lists the functional specifications of the system.

A2. Wireless

Details the wireless specifications, including RF network and encryption.

A3. Electrical

Covers electrical specifications like power supply and current ratings.

A4. Communication

Outlines communication capabilities like PSTN, cellular, and IP.

A5. Physical Properties

Describes the physical characteristics such as size, weight, and color.

A6. Peripherals and Accessory Devices

Lists compatible peripherals and accessory devices.

APPENDIX B. Compliance with Standards

Quick User Guide to Main Alarm Control Operations by KP-250 PG2 Keypad

Arming and Disarming the System

Instructions for arming and disarming the alarm system using the keypad.

Initiating Alarms

Procedures for triggering emergency, fire, and panic alarms.

Preparing to Arm

Steps to ensure the system is ready before arming.

Zone Bypass Scheme

How to bypass specific zones for temporary deactivation.