Visonic Remote Programmer Software - Creating a New Site

Chapter 4: Sites
16 DE5450S Remote Programmer Guide Rev. 8
4.2 Creating a New Site
You can create a new, empty site file or you can copy an existing file, save it under
a new name, and make the relevant changes to tailor it to a similar setup as the
original. You can create a new site either via the Site List window or directly in the
New Site window.
1. Click New in the Site List window,
or
In the Sites menu, click New Site.…
The New Site dialog box appears.
Figure 4-6: New Site Window - Work Online
The New Site dialog box has two tabs:
Work Online: Enables direct operation with the control panel via a serial port or
telephone modem.
Work Offline: Enables defining and changing parameters offline and at a later time
downloading these parameters to the control panel.
By default the New Site dialog box opens with the Work Online tab open.
Note: It is recommended to work online when creating a new site file, so that the
software will communicate with the control panel and will automatically select the
suitable PowerMax/PowerMaster model.