Chapter 9: Two Download Codes
62 DE5450S Remote Programmer Guide Rev. 8
9.2 Operation
Master Installer First Time Login
When performing login for the first time, the Master installer will enter the Master
Installer download code.
Regular Login
If the PowerMax/PowerMaster control panel accepts this code as a Master
code, the Remote Programmer will assign a Master privilege, and from then
onward the software will be able to use the Master privilege allowing full
access at any time to all the fields (online and offline).
Note: Each time a user opens either an existing or new site he will be able to
view all the data.
Installer
The installer enters the Installer download code and is assigned an Installer
privilege.
Special cases
A. Master and Installer as the same Download Code:
The PowerMax/PowerMaster control panel always confirms whether the download
code is Master or Installer. In the event that the Master and Installer code are
identical, the Remote Programmer will assign an Installer privilege.
To regain Master privilege
1. Log into the Remote Programmer.
2. Modify the Installer download code, then perform logout.
3. Login using the Master installer download code, (click Options -> data tab,
then insert the download code in the Edit box). Since there are now two
different download codes in the control panel, the panel will return the Master
privilege.
4. Modify the required data.
5. Before performing logout, modify the Installer download code to its original.
You can either modify the Master Download code or leave it as it is.
6. Save the data.
To Next Page
Loading...