Chapter 6: Data Details Tables
42 DE5450S Remote Programmer Guide Rev. 8
Condition Description of Yes state
NOT UPDATED Device configuration has not been updated yet
from the control panel.
HEAT OPEN Extreme heat is occurring.
HEAT ALARM Heat alarm is occurring, for example in extreme
heat. The alarm state ends only after disarming
and then rearming the system.
SMOKE OPEN Smoke or fire is occurring.
SMOKE TROUBLE The zone’s detector needs to be checked.
SMOKE ALARM Smoke alarm is occurring, for example, a fire is
burning. The alarm state ends only after
disarming and then rearming the system.
6.19 Panel Status/Trouble
This table is applicable to the PowerG models.
The Panel Status/Trouble screen displays diagnostic information that is uploaded
from the Control Panel.
A Yes indication alerts that a condition exists that needs checking. A No indication
means that the condition is normal.
Condition Description
STATUS 1/
STATUS 2
Armed/Disarmed, Ready/Not Ready
LOW BATTERY Control Panel’s battery needs replacement or is
not connected.
NOT ACTIVE Control Panel is not transmitting.
FUSE TROUBLE Fuse has shut the current circuit and will reset
automatically.
LINE FAILURE Telephone line or network (such as GSM) is
To Next Page
Loading...