Visonic Remote Programmer Software - Appendix A: Language Settings

Appendix A: Language Settings
DE5450S Remote Programmer Guide Rev. 8 77
Appendix A: Language Settings
When using the Remote Programmer Software in Windows XP with a foreign
language interface, some characters may not appear correctly in the chosen
language. This may require changing the language settings.
Windows XP
1. From Start>Settings>Control Panel double-click Regional and Language
Options. The Regional and Language Options dialog box appears.
Figure A-26: Regional and Language Options Window
2. Click on the Advanced tab.
3. Under Language for non-Unicode programs, click the drop-down list
and select the appropriate language.
4. Click OK.
5. Restart the computer.