Chapter 6: Data Details Tables
38 DE5450S Remote Programmer Guide Rev. 8
To Enroll a Keypad to the Control Panel
In order to perform this procedure, collect together:
A PowerMax/PowerMaster control panel, which will be used to pass the keypad
identifying information from the keypad through to the PC and from there to the
customer’s control panel.
The keypad that is to be enrolled and sent to the customer.
1. Enroll the keypad to the control panel as detailed in the PowerMax
Programming Guide.
2. Connect and login via serial connection to the control panel as detailed in
chapter 7: “Connecting to the Control Panel”.
3. Upload the keypad data from the panel.
4. In the Keypad Enrollment table, enter the keypad ID, the sync. counter
and the sync. counter backup numbers displayed on the screen next to
the keypad number to which you enrolled the keypad.
5. Logout and disconnect from the panel.
6. Connect and login to your customer’s PowerMax/PowerMaster
control panel.
7. Click the Options icon in the tool bar or select Options in the View
menu.
8. Select the Data tab.
9. Check the Send updated data immediately checkbox.
10. Enter the keypad ID, the sync. counter and the sync. counter
backup numbers to the relevant keypad in the Keypad Enrollment
table.
Every cell you update will be automatically downloaded to the
customer’s control panel. (Be sure not to change other parameters.)
11. Logout and disconnect.
Now all you have to do is to send the keypad transmitter to your customer!
To Next Page
Loading...