Vitalograph ALPHA Touch - Reporting; Deleting Stored Subjects;Test Results

09100 Issue 1
11Page of 36
ENG
ALPHA Touch - Instructions for Use
3.3. Reporting
Select ‘Print’ from the FVC Test screen to print the current test session.
Refer to section titled ‘Report Options’ to congure reports.
To produce a report for the Current Subject via the Report option in the ALPHA
Touch Main Menu, the following options are available:
• Current Session: Select the print icon at the top of the session results
screen.
• Saved Test Session for Current Subject: Select the required session
then the print icon at the top of the session results screen.
• All Test Sessions: It is possible to select to print all test sessions for
the current subject via a PC using Vitalograph Reports software. It is
not possible to automatically print all test sessions for a subject from
the internal printer.
To print Test Session(s) from a different subject in the database. Click the
‘Select’ tab in the View and Report screen. The following options are available:
• Select Test Session: Select a subject from the database, and then
select a test session for that subject. To print the selected session,
select the print icon at the top of the session results screen.
• All Test Sessions: It is possible to select to print all test sessions for
a selected subject via a PC using Vitalograph Reports software. It is
not possible to automatically print all test sessions from the internal
printer. Select a subject from the database to use this option.
• All Test Sessions Between…: This will print all sessions stored on the
device between specied dates via a PC using Vitalograph Reports
software. It is not possible to automatically print all test sessions from
the internal printer. Select the required date range to use this option.
The default test parameters on the report will vary according to regional
requirements. Test parameters can be congured to suit individual
requirements. Refer to section on Parameters.
Note: The internal (thermal) printout will fade over time when exposed to light or
heat. If a permanent record is required, photocopy the thermal printout or send
the report to the Vitalograph Reports Utility. Refer to section 3.6. Conguration
Options for information on selecting the internal or Vitalograph Reports Option.
3.4. Deleting Stored Subjects/Test Results
Instructions on deleting subjects/test results that have been stored
permanently on the device may be found in section 3.2.2. Saving the Test
Session.
Instructions on deleting sessions from the device database may be found in
section 3.6.2. Database