Vitalograph ALPHA Touch - Page 15

09100 Issue 1
15Page of 36
ENG
ALPHA Touch - Instructions for Use
Accuracy Log
1. Select ‘Accuracy Log’ from the Calibration screen. The accuracy
log contains a record of all the accuracy checks done on the
device.
2. There are three options:
a. To print the complete accuracy log press ‘Print All’.
b. To print a log of the last 30 accuracy tests done, press ‘Print Last
30’.
c. To view the accuracy log, press ‘View’.
3. Press C to return to the Calibration screen.
3.6.4. Settings
The following options are available in the Device Settings screen:
• Date/Time: Update the date and time including format
• Units: Metric/Imperial
• Sound Options: On/Off/Volume
• Power Save Options: Display dulls after 3 minutes
• Incentive: Select incentive, % predicted and % best test
• Parameters: Select parameters for report/printing
Date/Time
There are two tabs in this screen for the time and date.
1. Change the time by scrolling the hours and minutes to the required
settings by pressing the arrows on the touch panel LCD.
2. Change the time format from 24 hour to 12 hour by switching the
’24 Hour Format’ option off or on.
3. Change the date by scrolling the day, month and year to the
required settings by pressing the arrows on the touch panel LCD.
Units
Modify the units by selecting between Metric and US (Imperial) in the drop
down list.
Sound Options
• Select Off/On options for Key, Flow, Error and Welcome sounds on
the device.
• Adjust the volume by pressing the ‘-/+’ on the touch panel LCD.
Power Save Options
In order to improve battery life the device can be congured to dull the display
after 3 minutes. This can be switched on or off.
Incentive
The Incentive Device is used as an aid in testing of children.