19 MicroLinks Technology Co., Ltd.
(3) Image Control Model : you can take the machine by your
left or right hand, adjust image direction of yourself or object,
as well as adjusting contrast, brightness and exposure rate of
the image. Please refer to the following image for tools of
Image Control Model.
(4) Measurement Model : the model can be used as rulers and
compasses. Further, the model can measure in the dynamic
(real-time image) or static (loaded images or frozen image)
images, as well as providing various measuring tools. Please
refer to the following image for tools of Measurement Model.
4. Printed Notice
Please read the following information carefully before using the
products.
4.1 Maintenance
Please abide by the following items while storing or using the
product:
(1) Keep dry: do not place the product in a humid environment.
Dry surroundings are helpful to extend the service life of the
product.
(2) Avoid temperature shock: temperature shock will cause
internal condensation inside the machine, for example, take
the product into a warm room from cold environment. Please
put the machine inside the protection bag or handbag in
advance to prevent temperature shock, and avoid using the
machine in an environment with over-high or over-low
temperature.
(3) Avoid collision and drop: the product might go wrong by
strong collision, vibration or distortion.
(4) Shut down the machine before cutting off the power supply or
removing the battery: do not forced cut off the power supply
or remove the battery.
(5) Do not make the lens against strong source for a long time:
please do not make the lens against the sun or other strong
sources for a long time. Strong light rays might degrade
sensitive elements and generate white stain in the image.
(6) Handle SD Card and movable parts carefully: do not force
disassemble SD card or squeeze screen, connection lines of
power supply and battery cover. Avoid contacting the lens
since they are subjected to damage.
(7) Machine not in operation: please switch off power supply and
remove battery or unplug power cable, and store them in a dry
place with excellent ventilation. Do not expose the machine in
an environment lower than -5℃ or higher than 50℃.
(8) Appropriate storage: while carrying, please put the machine
inside the protection bag to prevent it from being damaged
because of collision.
To Next Page
Loading...
