EasyManua.ls Logo

ViTiny PRO10 - Product Specifications and Safety; 4.2 Technical Specifications; 4.3 Essential Safety Instructions

ViTiny PRO10
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20 MicroLinks Technology Co., Ltd.
4.2 Product Sizes
Sensitive
Element
2 million pixels CMOS
Lens
High-sensitive Lens
Auxiliary
Source
Ultra-bright white light LED x 8
LCD
2.8 TFT Color LCD
SD Memory
Card
2 G Byte SD Card
Communication
USB2.0 Compatible; AV Terminal Compatible
Magnification
Optical Zoom 1x~ 10 x (continue) and 40 x; 5 x
Digital Zoom
Joint
DC IN Terminal (mini USB joint)
Lithium Battery
Model: NP-120; Voltage: 3.7 V
USB Power
Supply Device
AC Transformer
(Output: DC 5.0/1A Input: AC 100-240V
50/60Hz)
Electric
Consumption
4V/360mA
Size
129 × 67 × 28 mm
Weight
Host weighs around 120 grams (160 grams
including the battery)
Operation
Environment
Temperature -5 ~ 50; Humidity-lower than
85% (No Condensation)
For any change, please visit
http://www.vitiny.com to check information.
4.3 Safety Instructions
(1) As an electronic product, please do not use the machine in any
place in which all electronic products are prohibited or
required to shut off electronic products.
(2) Please do not make the machine close to water source or wet
since it is not waterproof. Avoid electric shock.
(3) Do not make the machine close to chemicals, objects with
explosive hazard or fire sources. Please switch off the product
in gas station.
(4) In case that there is foreign body or water inside the machine,
or the machine drops off, or the housing is damaged, please
switch off power supply and remove battery or power supply
device to avoid fire and electric shock.
(5) Do not look steadily at auxiliary sources after switching on the
host as it is harmful to your eyes.
(6) Please use related products provided by original factory for
connection. Do not use any product in connection on your own
without approval of original factory.
(7) If the machine is left unused in a long time, please remove the
battery to avoid leakage and erosion of battery electrolyte.
(8) Please dispose used battery in a proper way complying with
local laws and regulations. Do not discard them in public
waste field.
(9) Do not disassemble the machine for inspection on your own.
For any problem occurred in the machine itself, please switch
off the machine and then contact us by e-mail to the following
address: mltc@vitiny.com

Related product manuals