Vivax Metrotech vLoc3 Series User Guide

Table of Contents
1. vLoc3 Remote Antenna Introduction...........................................................................1
2. Standard Operation - 512Hz to 200kHz......................................................................1
2.1 Applying the transmitter Signal............................................................................1
2.2 Identifying a cable with the remote antenna........................................................2
2.3 Enhancing the loopback method of cable identication.......................................3
3. Using the SD Signal....................................................................................................4
3.1 Performing a remote antenna SD reset...............................................................5
3.2 Identifying a cable with SD mode........................................................................6
3.3 Enhancing the loopback method of cable identication with the aid of the SD
signal..................................................................................................................6
4. Using the SIS Signal...................................................................................................6
4.1 Performing a remote antenna SIS reset.............................................................7
4.2 Identifying a cable using SiS..............................................................................8
4.3 Enhancing the loopback method of cable identication using the SIS signal........9

Vivax Metrotech vLoc3 Series Specifications

General

Brand	Vivax Metrotech
Model	vLoc3 Series
Category	Receiver
Language	English