VIVAX ENG
14
Control Panel
Antenna and Power Connection
1. Connect the antenna cable into the antenna input terminal at the rear panel
and wall antenna socket.
2. Connect the Power plug into the wall outlet.
Powe
Turn the TV on or enter into
standby mode.
SOURCE Signal source selection button.
MENU Enter / Exit the main menu.
VOL- Volume decreasing short cut key;
enter into the next menu and
adjust OSD options (decreasing).
VOL + Volume increasing short cut key;
enter into the next menu and
adjust OSD options(increasing).
CH- Channel decreasing short cut
key; decrease the channel No.
and select the last option in the
menu.
CH+ Channel increasing short cut key;
increase the channel No. and
select the next option in the
To Next Page
Loading...
Need help?
General
