ENG VIVAX
17
► SCART
Connect the Scant cable from an external A/V Device.
• Press [SOURCE] button, when the list of Input Source appears, press [▲/▼]
to select the source [SCART] and press [ENTER] to connect.
► USB
Connect the USB devices such as hard drives, USB sticks and digital cameras
for browsing photos, listening music and watching recorded movies. At the same
time update is also an easy thing and will be done just by plugging the USB with
the updating files into the same interface
NOTES
When connecting a hard disk or a USB hub, always connect the mains adapter of the
connected device to the power supply. Exceeding a total current consumption may result
in damage. The maximum current consumption is 500mA.
For individual non-standard high-capacity mobile hard disk, if it's impulse current is greater
than or equal 500mA, it may cause TV-rebooting or self-locking. So the TV does not support
it.
The USB port supports a voltage of 5V.
The maximum supported storage space of the hard disk is 1T.
If you want to play the video streaming of a DTV program, the transfer rate of the USB
storage device must not be less than 5MB/s.
VCR/DVD Player/Recorder/
Set-top box/Satellite Receiver
To Next Page
Loading...
Need help?
General
