ENG VIVAX
33
To return in previous Menu, press MENU button.
To Exit from OSD Menu, press EXIT button or repeatedly press MENU button.
PICTURE SETUP
1. Press MENU button to display the main
menu.
2. Press ▼ / ▲ button to select PICTURE
SETUP in the main menu and press
OK.
3. Press ▼ / ▲ button to select the option
that you want to adjust in the PICTURE
menu.
4. Press OK button to adjust.
5. After finishing your adjustment, Press
MENU button to save and return to the
previous menu or press EXIT button to
enter into normal TV mode.
Picture Mode
Press ▼ / ▲ button to select Picture Mode,
then press OK button to enter Sub-menu.
Select preset Picture mode: Standard,
Dynamic, Mild or User.
You can change the value of contrast,
brightness, color, sharpness and tint when the picture is in User mode only.
When you choose User mode, press OK to enter into Sub Menu to adjust
picture settings:
Contrast/ Brightness/ Colour/ Sharpness
Press ▼ / ▲ button to select option, then press ◄ / ► button to adjust.
Brightness: Adjust the optical fiber output of the entire picture, it will effect
the dark region of the picture.
Contrast: Adjust contrast.
Colour: Adjust the saturation of the color.
Sharpness: Adjust the sharpness of the pcture
Color Temp
Change the overall color cast of the picture.
Press ▼ / ▲ button to select Color Temperature , then press OK button to enter
sub-menu.
Press ▼ / ▲ button to adjust optimal color temperature (Picture looks brighter
when Color temperature is higher).
To Next Page
Loading...
Need help?
General
