Vivint — User Guide
- 29 -
7. When the Exit Delay expires, the system is fully armed in the Away Mode. (NOTE: When the system is
armed in the Away Mode, beeps sound during the Exit Delay, with faster beeps during the last 10
seconds.)
Exit and Entry Delays in Away Mode
Certain sensors, such as a door, can be setup by your Technician to have a delay before triggering an alarm.
This provides a way for an authorized person to exit and reenter the premises without triggering an alarm.
l
Exit Delay: Allows time to leave after arming the system.
l
Entry Delay: Allows time to enter and disarm the system before an alarm is triggered. When arming the
system in Away Mode, an Entry Delay option is shown on the Security screen. By default, this option is
enabled, so the configured delay doors allow time for disarming the system after the door is opened. If
you disable this option, the delayed alarm trigger is removed from all sensor‐protected doors pro-
grammed for delay. Those entrances instantly trigger an alarm if they are opened in Away Mode.
NOTE: With the Entry Delay disabled, you must remotely disarm the system with a wireless key fob
before entering.
Exit Delay Restart
The Exit Delay Restart option extends the Exit Delay one time if you need to re‐enter the premises. With the Exit
Delay Restart option, when you re‐enter the premises afteryou have left, but beforethe Exit Delay timer expires,
will restart the Exit Delay timer, giving you the full length of time to leave again.
NOTE: The Exit Delay Restart option only works once each time the system is armed.
Silent Control in Away Mode
Three options for silencing the beeps and announcements are available when arming or disarming the system
in Away Mode.
l
On the Control Panel Home Screen, a Silent Exit option is displayed.
l
On the Arming Screen, a Silent Exit option is displayed.
l
On the Exit Delay Screen, a Silent Exit option is displayed.
Selecting any of these options silences the Control Panel beeps and announcements, and when arming, select-
ing Silent Control doubles the length of the Exit Delay.
Quick Exit in Away Mode
A configurable option called Quick Exit may be displayed on the Security screen while the system is armed in the
Away Mode. Pressing the Quick Exit button starts a timer to allow someone to exit or enter through a sensor‐
To Next Page
Loading...