Vivint — User Guide
- 65 -
Wireless Keypad Emergency Keys
Each standard wireless keypad has Fire and Police emergency buttons that can be enabled or disabled for each
keypad.
Refer to the table below for options set for your keypads:
Exit Delay Restart
The Exit Delay Restart option will extend the Exit Delay one time if you need to re‐enter the premises. When the
system is armed in the Away Mode or Stay Mode, the Exit Delay gives you time to leave without setting off the
alarm. With the Exit Delay Restart option, re‐entering the premises after you have left, but before the Exit Delay
timer expires, will restart the Exit Delay timer, giving you the full length of time to leave again. The restart option
only works once, each time the system is armed.
l
On
l
Off
Cancel Display
A “cancel” message will be sent to the Central Station if the system is disarmed within a preset period of time
after an alarm is triggered. The system can be set to display that a cancel report was sent, or for higher security,
the system can be set not to display the cancel message.
l
On
l
Off
Cancel Time
To limit responses to false alarms, a “cancel” message will be sent to the Central Station if the system is dis-
armed within a preset period of time after an alarm is triggered.
The alarm report is always sent, but it will be followed by a cancel report if you disarm the system within the pre-
set time.
This option helps the Central Station to determine whether you accidentally caused the alarm or if the alarm
report was caused by an intruder. It also lets the Central Station know that you have returned to the premises.
Even if a cancel message is sent, the Central Station will verify the alarm and possibly dispatch help. The cancel
message may be processed by the Central Station at a later time depending on system configuration.
l
5 Minutes is the default, or _______ Minutes
To Next Page
Loading...