Vivint SkyControl - Page 20

14 Home Security Protection
2. AttheSecurityscreen,pressDisarm.
3. EnteravalidUserPINtodisarmthesystem.
Qu i c k E xi t in Stay M od e
AsystemsettingcalledQuickExitmaybedisplayedontheSecurityscreenwhilethesystemis
armedintheStayMode.
PressingtheQuick Exitbuttonstartsatimertoallowsomeonetoexitorenterthroughasensor-
protecteddoorprogrammedfordelaywithouthavingtodisarmtheentiresystem.Whenthetimer
runsout,thesystemreturnstothenormalStayMode.
TheQuickExitoptionisonbydefault,andcanbeturnedonoroffbyyourVivintFieldServicePro-
fessional.
Disarming from Leave Mode
ThesystemshouldbedisarmedfromLeaveModewhenenteringyourhome.
To disarm the system from Leave Mode
1. Enterthehomethroughaprotecteddoor.
2. TheDisarmscreendisplaysonthepanelandtheEntryDelaybeepssound.
3. EnteravalidUserPINtodisarmthesystem.